| Additional Information | : | Glass-Filled Noryl Impeller Material |
| Amperage Rating | : | 2.1 A |
| Connection Size | : | 2 in |
| Connection Type | : | NPT Flanged |
| Dimensions | : | 8-1/2 in H x 9-15/16 in W x 4-5/8 in D |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/6 hp |
| Material | : | Iron |
| Maximum Pressure | : | 150 psi |
| Model | : | PL-75 |
| Motor Speed Rating | : | 3400 rpm |
| Mounting Type | : | In-Line |
| Phase | : | 1 ph |
| Series | : | PL Series |
| Temperature Rating | : | 225 deg F |
| Voltage Rating | : | 115 V |
Bell & Gossett Circulator Pump, PL Series, Model: PL-75, 115 V, 2.1 A, 60 Hz, 150 psi Maximum Pressure, 3400 rpm Motor Speed Rating, 1/6 hp, 2 in Connection, NPT Flanged Connection, 1 ph Phase, In-Line Mounting, 225 deg F, Iron, 8-1/2 in H x 9-15/16 in W x 4-5/8 in D, Additional Information: Glass-Filled Noryl Impeller Material
- The pumps shall be of the horizontal, permanently lubricated type, specifically designed and guaranteed for quiet operation
- The pumps shall have a steel shaft supported by permanently lubricated, sealed precision ball bearings
- The pumps are to be equipped with a water-tight seal to prevent leakage
- Mechanical seal faces to be carbon on silicon carbide
- The motor shall be non-overloading at any point on the pump performance curve
- The motor shall be of the drip-proof, sealed precision ball bearing, quiet operating construction
- The permanent split-capacitor motor shall be equipped with thermal overload protection
- The Series PL features a maintenance-free system, with a self-cleaning particle shield protects the shaft and bearings from system start-up debris
- Easily handles dirty water conditions
- 25% more efficient than competition
- Close coupled dry motor